IN-LITE® PUCK 22 Recessed Path Lights - 12v

Unhide your garden with in-lite®.

The in-lite® PUCK 22 recessed path lights are a compact fitting designed to emit a subtle, glare free glow of light in all directions. Constructed from strong polycarbonate with an anodized aluminium cap, these trapezium shaped light fittings are IP67 rated and drive-over approved. As a result these fixtures are ideal for use as indicator or marker lighting along paths, patios, decking and driveways. in-lite® recommend spacing the PUCK 22 fittings around every 1½ to 2m. They are available with a Black finish as standard, or Pearl Grey upon request.

They just require wood or stone with a Ø22mm hole drilled for installation of the fitting. Alternatively, for mounting in soft ground, the in-lite® SPIKE 22 accessory can be used. Each fitting comes with a tapping plate to prevent the anodized cap of the PUCK 22 being damaged during installation. Please see the Installation Guide PDF on this page for more instructions.

Also available is the larger PUCK which features a much higher light output and a Ø60mm cut-out.

Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT CORDs cable extensions.

Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.