IN-LITE® PUCK Recessed Path Lights - 12v

Unhide your garden with in-lite®.

The in-lite® PUCK recessed path lights are designed to emit a strong but low glare glow of light in all directions. Constructed from strong polycarbonate with an anodized aluminium cap, these trapezium shaped light fittings are IP67 rated and drive-over approved. As a result these fixtures are ideal for use as indicator lighting along paths, patios, decking and driveways. in-lite® recommend spacing the PUCK fittings around every 1½ to 2m. They are available with a Black finish as standard, or Pearl Grey upon request.

They just require wood or stone with a Ø60mm hole drilled for installation of the fitting. Please see the Installation Guide PDF on this page for more instructions. Alternatively, for mounting in soft ground, the in-lite® SPIKE accessory can be used.

Also available is the much small PUCK 22 which features a much lower light output and a Ø22mm cut-out.

Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT CORDs cable extensions.

Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.