IN-LITE® HYVE 22 RVS Recessed Lights - 12v

Unhide your garden with in-lite®.

The in-lite® HYVE 22 RVS feature a 28mm Stainless Steel bezel, but are otherwise identical to the HYVE 22, producing just a 2 lumen light output along with a very small cut-out of just Ø22.4mm. Although the bezel is visible during the day, these fittings come alive at night as they feature a honeycomb style lens that produces an attractive, low-glare, warm light. This makes them ideal for use as marker lights around areas with high traffic such as walkways, paths, decking, or even driveways. They are suitable for drive-over applications. in-lite® recommend spacing the HYVE 22 RVS fittings around every 1½ to 2m. For mounting in soft ground, the in-lite® SPIKE 22 accessory can be used.

These fittings are also available without a bezel for a more seamless installation, the HYVE 22. If slightly more light is desired, the larger HYVE, with a Ø60mm cut-out, can be used instead.

Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT CORDs cable extensions.

Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.