IN-LITE® FUSION Recessed Lights - 12v

Unhide your garden with in-lite®.

The in-lite® FUSION feature a 68mm Stainless Steel bezel and produce just 16 lumens of light. These fixtures come alive at night and produce a lovely warm glow of light from their frosted lens, with absolutely zero glare. This makes them ideal for use as marker or accent lighting around areas with high traffic such as walkways, paths, decking, or even driveways. They are suitable for drive-over applications. in-lite® recommend spacing the FUSION fittings around every 1½ to 2m.

To enable installation into gravel or soil, the BOX100 accessory can be used. This accessory acts as a canister, allowing the product to be installed securely into these loose materials. For spike mounting into soft ground, the in-lite® SPIKE accessory can be used. If a square bezel is preferred but the fixtures are being mounted in wood or stone, the PLATE 75 accessory can be used instead. The PLATE 75 simply clips onto the FUSION, creating a square bezel that measures 75mm x 75mm.

There are two other options in the FUSION concept family, the FUSION 22 and FUSION 22 RVS. Both of these fixtures feature a 1 lumen light output and Ø22mm cut-out. The FUSION 22 has no bezel and is completely seamless when installed, while the FUSION RVS has a 28mm Stainless Steel bezel.

Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The cable length between the EASY-LOCK and the light fitting can be easily extended by up to 3m using the CBL-EXT CORDs cable extensions.

Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.