IN-LITE® SMART EVO FLEX TONE LED Strip Lights - 12v - RGB

Unhide your garden with in-lite®.

The in-lite® SMART EVO FLEX TONE is an RGB colour changing LED strip that should be connected to the SMART EVO FLEX DRIVER provided. This power supply also enables dimming of the LED strip. Both the colour changing and dimming features can be accessed through the in-lite® app. This requires the SMART HUB-150.

The in-lite® SMART EVO FLEX TONE strip light is specially designed to provide a completely frosted and glowing lighting effect without individual LEDs or "hot spots" being seen along the strip. This strip light is available in lengths of 1m, 2m and 5m. Need a different length than the available sizes? No problem! Simply trim the SMART EVO FLEX TONE to the desired length using the cut-points located along the strip. The flexibility of this product means that it's completely up to you how you use the SMART EVO FLEX TONE - down to the very last centimetre. After cutting, the MINI WATERLOCK that is supplied with each length can be used to re-seal the strip light to maintain the IP68 rating.

The magic of the SMART EVO FLEX TONE lies in its flexibility, making it possible to conform into virtually any possible shape. Whether your garden has straight lines or lots of organic shapes, the SMART EVO FLEX TONE fits in perfectly! Out of sight during the daytime, these fixtures can create unique colours through their RGB LEDs that, when used correctly, can bring interesting and colourful aspects to the garden at night.

There are a host of accessories available for a wide variety of installations: the SPIKE for ground mounting in soft ground, CLIPS for curved installation, two types of PROFILE for linear installation, CORNER INSIDE and CORNER OUTSIDE for bending the strip neatly round corners and finally SMART EXT CORD TONE for extending the cable by 1m.

Each 12v in-lite® fitting features an LED with a 25,000 hour lifetime, giving you the peace of mind that they are built to last for years to come. They are covered under warranty for 5 years when used with the in-lite® system. Each light strip is supplied with one of their EASY-LOCK connectors for easily connecting to anywhere on the chosen in-lite® CBL 12v cable. The fitting is then easily connected to the EASY-LOCK using the push-fit connection. The provided SMART EVO FLEX DRIVER 1 can then be connected in-line between the EASY-LOCK and the LED strip.

Note: When calculating the total transformer load within an in-lite® system it is crucial to add up the total VA rating rather than the wattage due to power losses. This VA load should not exceed the total stated on the chosen transformer.

Note: Due to the higher VA requirements of the SMART EVO FLEX TONE strip lights, in-lite® recommend placing the strip light no farther than 40m from the transformer whilst using the larger 10/2 gauge cable to ensure optimal operation.