Integral LED Thin Frosted Neon Strip Light - Side Bendable - 7.2w/m

This strip light from Integral LED is designed to be as thin and compact as possible, boasting a width of just 4mm and a height of 10mm. This also makes this LED strip incredibly flexible, with a bending radius of just 10mm, enabling lengths to be curved around tight corners without issue. Despite the size, they feature a frosted silicone lens that ensures a totally dot-free lighting effect, hence the 'neon' name.

Supplied in lengths of 5m and rated to an impressive IP67 rating, they are provided from the factory with soldered flying leads for connecting directly to one of our selection of 24v outdoor power supplies.

This strip light features cut points every 40mm that enable the original 5m lengths to be cut down to bespoke sizes to suit the job at hand. Once cut, the end of the strip must be sealed using the thin neon strip end caps along with silicone sealant to preserve the IP67 rating. The off-cut can be re-used, but does require a new flying lead to be soldered before once again sealing with silicone sealant. There are connection accessories available that are designed specifically for use with this strip light.

There are two mounting accessories available; either 1m lengths of linear profile, or fixing clips that are supplied in packs of 5 and provided with screws.

Dimensions: height of strip 10mm; width of strip 4mm; cut points located every 40mm; length of flying lead 500mm (approx.)