Wall Pipe Transition Kits

Upon popular request we have put together these wall transition kits to allow flexible pipework to be taken through into a pond, reservoir or water feature.

To install, simply drill the relevant sized hole and install the threaded connector in place, ensuring the rubber washers are placed on either side of the transition. The hose tails can then be screwed on to the exposed threads, ensuring that the provided PTFE tape is wrapped around the male threaded hose tail to ensure the thread is sealed and the provided o-ring is installed on the female threaded hose tail. If the stepped hose tails are used then we recommend cutting the unused sections of the hose tails off to ensure maximum flow is achieved. We recommend using a bead of sealant around the seal to further increase water tightness and longevity.

We also offer transition kits for cable entry.