Hunza PURE LED Flush Inground Washer Lights - s/steel

The light output for Hunza PURE LED range is based around industry-leading Cree LEDs with an expected life of 60,000 hours (up to 20 years if operated 8 hours per day) and incorporates a machined aluminium heat sink, critical to the cool operation and long life of the LED. The heart of the system is the plug-in LED board, which as technology improves, makes it a simple task to repair and upgrade rather than replace the whole fitting. Machined from the finest materials, PURE LED lights are finished to Hunza’s usual high standard.

As the name suggests, the Hunza flush inground washer lights utilise a flat bezel that allows the fitting to lay flush with the ground. They are fitted with an asymmetric lens that directs light out of the fitting at an angle with a wide wash of light, with minimal amounts of glare when viewed from the side or above. This makes them ideal for use for washing walls with functional light or for highlighting key architectural features. It's recommended that they are placed further away from the wall than smaller wall wash fittings to prevent a 'hot spot', simply due to the significant lumen output from the 6w LED chip.

Complete with a canister for simple installation on site, these fittings require series wiring to 700mA constant current power supplies. As this creates a low voltage circuit, these fittings are compatible with our EasyTee connectors.

The flush bezel design combined with the stainless steel construction means they have a maximum load rating of 2000kg, enabling them to be installed in driveways.

These fittings are also available in copper, however they are only suitable for foot traffic due to the softness of copper.

Dimensions: Ø of bezel 110mm; Ø of body 88mm; length of body 59mm; Ø of canister 100mm; length of canister 105mm; cable length 1m